1 Attachment Lifting Cylinder
Areas of use
- Double-acting hydraulic cylinder for raising and lowering the attachment on combine harvesters
Technical data
- Piston diameter: usually 70-80 mm
- Stroke: usually up to approx. 900 mm
- Cylinder connection with joint bearing, sliding bushing or fork
Customer benefits
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
2 Attachment tilt cylinder
Areas of use
- Double-acting hydraulic cylinder for tipping the attachment on combine harvesters
Technical data
- Piston diameter: usually up to 120 mm
- Stroke: usually 140 – 400 mm
- Cylinder connection with joint bearing, sliding bushing or fork
Customer benefits
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
3 Reel cylinder
Areas of use
- Double-acting hydraulic cylinder for matching the reel to the height of the field
Technical data
- Piston diameter: usually 50 – 80 mm
- Stroke: usually 200 – 500 mm
- Cylinder connection with joint bearing, sliding bushing or fork
Customer benefits
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
4 Table cylinder
Areas of use
- Double-acting hydraulic cylinder for adapting the table to different harvesting conditions
Technical data
- Piston diameter: usually approx. 80 mm
- Stroke: usually 200 – 800 mm
- Cylinder connection with joint bearing, sliding bushing or fork
Customer benefits
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
5 Chassis cylinder
Areas of use
- Double-acting hydraulic cylinder with integrated valve technology for adapting the chassis in sloping positions
Technical data
- Piston diameter: usually 120 – 140 mm
- Stroke: usually 200 – 500 mm
- Cylinder connection with joint bearing, sliding bushing or fork
- Integration of complex valve functions into the cylinder body
Customer benefits
- Enables fieldwork in challenging hillsides
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
6 Steering cylinder
Areas of use
- Double acting synchronous cylinder for steering of combine harvesters
Technical data
- Piston diameter: usually approx. 80 mm
- Stroke: usually 200 – 400 mm
- Cylinder connection with joint bearing, sliding bushing or fork
- Configuration as differential cylinder or synchronous cylinder
Customer benefits
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
7 Dischare pipe cylinder
Areas of use
- Double-acting hydraulic cylinder for the retraction and extension of the discharge pipe on combine harvesters
Technical data
- Piston diameter: usually 60 – 90 mm
- Stroke: usually up to approx. 900 mm
- Cylinder connection with joint bearing, sliding bushing or fork
Customer benefits
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
8 Belt Tensioning cylinder
Areas of use
- Single acting hydraulic cylinder for tensioning of drive belts
Technical data
- Piston diameter: usually 30 – 80 mm
- Stroke: usually 100 – 500 mm
- Edge layer hardening of the piston rod according to customer requirements
- Cylinder connection with joint bearing, sliding bushing or fork
Customer benefits
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
9 Cylinder with integrated piston accumulator (belt drive)
Areas of use
- Single-acting hydraulic cylinder with integrated piston accumulator for tensioning and springing in belt drives
Technical data
- Piston diameter: 75 mm
- Stroke: 185 mm
- Rated pressure: 210 bar
- Integration of the nitrogen accumulator in the piston rod
Customer benefits
- In-house electroplating with possibility for edge layer hardening
- Individual product solutions according to customer requirements
- Configuration as a system with valve and control technology possible from a single source
*The information provided is exemplary. Developments can be tailored to specific requirements.
WEBER-HYDRAULIK – Your competent partner
Our hydraulic solutions and most of our hydraulic components are developed and adapted individually with our customers to achieve optimum results. Thanks to our many years of development expertise, we are able to develop and implement high-quality hydraulic systems ourselves. Our customers benefit from our high level of competence in the production of the necessary components such as hydraulic cylinders, valves and manifolds and MPUs as well as the development of software and electronics.
We will be pleased to support you in the development stage of your serial products – please contact us.