Flow Control Valve VCL-14
The valve VCL is a screw-in valve for assembly directly into the thread. It limits a flow rate in the working direction to the indicated nominal value.
The size of the flow rate is specified with a drilling in the hardened and polished piston. By the principle orifice drilling is the valve relatively viscosity independent. The dispersion of valves of same nominal value with same Δp is very small. In the opposite direction the medium flows free through the orifice drilling. For tubing or assembly on cylinders there are various bodies available.
Characteristics:
- screw-in flow control valve
- various sizes available
- compact design
- load compensated
- maintenance-free
Flow Control Valve VCL-14
The valve VCL is a screw-in valve for assembly directly into the thread. It limits a flow rate in the working direction to the indicated nominal value.
The size of the flow rate is specified with a drilling in the hardened and polished piston. By the principle orifice drilling is the valve relatively viscosity independent. The dispersion of valves of same nominal value with same Δp is very small. In the opposite direction the medium flows free through the orifice drilling. For tubing or assembly on cylinders there are various bodies available.
Contact Person
Valve technology
+49 7531 9748-54 | |
+49 7531 9748-44 | |
anfrage.dekw@weber-hydraulik.com |
Mobile Classic
+49 8702 4939-70 | |
+49 8702 49397-3099 | |
info.de-w@weber-hydraulik.com |
Company
WEBER-HYDRAULIK GMBH
Heilbronner Str. 30
74363 Güglingen
GERMANY
+49 7135 71-0 | |
+49 7135 71-10301 | |
info@weber-hydraulik.com |