Proportional Chopper Amplifier SC-/ESC-/DSC-2000-U
The amplifiers can be used both in mobile applications as well as in stationary installations. The voltage range is therefore very broad and varies between 8 and 35 V DC. These amplifiers are very insensitive to undervoltage and voltage spikes, these amplifiers are very insensitive. They can be controlled via PLC or external potentiometers. Thanks to an optimal Imin and Imax setting it is possible to achieve a very good area dither frequency.
Special features:
- Compensation of the temperature-dependent resistance change of the proportional solenoid
- Standard dither frequency of 140 Hz (PWM)
- Multiturn potentiometer to set Imin, Imax and ramp time
- 2 LEDs to control the power supply and the output state
- Maximum current setting of up to 2.6 A, i.e. for solenoid voltages of 12 V and 24 V
- Possibility of external control via variable voltage or current
Designs:
- SC-2000-U: amplifier plug that can be plugged in directly to proportional solenoids.
- ESC-2000-U: single-amplifier block for one proportional solenoid. For mounting on 35 mm top-hat rail according to DIN EN 50022 or 50035.
- DSC-2000-U: double-amplifier block for two proportional solenoids, that can be used completely independent of each other. For mounting on 35 mm top-hat rail according to DIN EN 50022 or 50035.
Proportional Chopper Amplifier SC-/ESC-/DSC-2000-U
The amplifiers can be used both in mobile applications as well as in stationary installations. The voltage range is therefore very broad and varies between 8 and 35 V DC. These amplifiers are very insensitive to undervoltage and voltage spikes, these amplifiers are very insensitive. They can be controlled via PLC or external potentiometers. Thanks to an optimal Imin and Imax setting it is possible to achieve a very good area dither frequency.
Technical specifications
Product Categorie | Electronics and Sensors |
---|---|
Product Line | Proportional Chopper Amplifier |
Contact Person
Valve technology
+49 7531 9748-54 | |
+49 7531 9748-44 | |
anfrage.dekw@weber-hydraulik.com |
Mobile Classic
+49 8702 4939-70 | |
+49 8702 49397-3099 | |
info.de-w@weber-hydraulik.com |
Company
WEBER-HYDRAULIK GMBH
Heilbronner Str. 30
74363 Güglingen
GERMANY
+49 7135 71-0 | |
+49 7135 71-10301 | |
info@weber-hydraulik.com |